180724_C1_qhrg3-kln_closed_asm_no_shadow_v04
Hansen P4 hor par - special blue color_v02
Hansen P4 hor - M3 DP - original Hansen green color_v02
Hansen P4 hor - M7 DP - original Hansen green color_v02
180724_C1_qhrg3-kln_closed_asm_no_shadow_v04
Hansen P4 hor par - special blue color_v02
Hansen P4 hor - M3 DP - original Hansen green color_v02
Hansen P4 hor - M7 DP - original Hansen green color_v02

Hansen P4 Multistage - Horizontal

Dedicated Gearbox series to measure all horizontal applications

  • Specific horizontal housing - available in 19 sizes from 6 to 1100 kNm output Torque.
  • Parallel and right Angle - 2/3/4 stage gearboxes with a wide range of reduction ratios.
  • Service friendly with split plane, inspection cover and maintenance-free sealing system.
  • Reliable product series allowing flexible customization and options upon request.
  • Powerful Hansen P4 gear geometry for low noise and vibration levels.
  • For horizontal gearboxes below 80kNm consider also using the PARAMAX 9000 series

Key Product Facts

1.100 kNm
Maximum Nominal output Torque (and even larger upon request)
19 sizes
Parallel and Right Angle gearboxes
2/3/4 stages
A wide range of reduction ratios

Advantages of Hansen P4 Horizontal Series

Dedicated Horizontal Housing
Stepped housing, better load distribution & easy access to mounting feet
Split Housing & Large Inspection Cover
Maintenance-friendly, easy inspection without oil drainage
Powerfull Gear Geometry
For maximum load capacity, minimum losses & lower noise levels
Maintenance-Free Sealing Systems
Oil-lock at the high speed shaft designed to keep the oil in and dirt out
Never a Dry Start-up
Centralized oil filling guarantees initial oil lubrication at start-up. During operation, optimized splash lubrication with oil flow through the bearings
Instruments & Accessories
Condition monitoring instruments, Cooling devices & Complete Drive Packages (including base plates or lantern housings, motors, couplings,...)
ATEX / UKCA EX certification
Certification for explosive environments

Never a dry startup

Centralized oil filling guarantees initial oil lubrication at start-up. During operation, optimized splash lubrication with oil flow through the bearings.

Maintenance-Free Sealing Systems

The unique Oil-lock™ system, standard on all Hansen P4 gear units, offers a maintenance free sealing on the high-speed shaft extension. It is designed to keep the oil in and dirt out without the need for expensive periodic maintenance interventions.

Related Hansen Industrial Gearboxes products

Hansen M5CT
Hansen P4 Single Stage
Hansen P4 Multistage - Vertical
Hansen M4 ACC